FORESTRY MULCHING
A forestry mulcher grinds standing brush and small trees in a single pass, leaving a layer of chips behind. It's faster and lower-impact than dozer clearing for undergrowth, fence lines, and selective thinning.
Wondering what it'll cost? See our forestry mulching cost per acre guide for real 2026 price ranges in West Alabama and what drives the number.
COMMON USES
- Underbrush and sapling removal
- Fence-line and pipeline right-of-way maintenance
- Hunting lanes, shooting lanes, and food-plot edges
- Lot cleanup before building site prep
- Selective thinning where you want to keep mature trees
TYPICAL PROJECT PROCESS
- Identify keep-trees and boundaries with the owner.
- Run the mulching head over standing brush and saplings up to roughly 8 inches.
- Make a second pass on heavier material if the spec calls for finer chip.
- Leave chips on the ground as cover, or rake into piles if you'd rather.
EQUIPMENT USED
- Track loader with forestry mulching head
- Skid steer with mulcher for tight work
COMMON QUESTIONS
Is forestry mulching cheaper than traditional clearing?
For underbrush and small trees, yes — it's a single pass with no hauling or burning. For heavy timber with stumps you'll still want an excavator and dozer, often combined with mulching.
What size trees can you mulch?
Comfortably up to about 8 inches in diameter with the track-loader head. Larger trees we drop and process separately.
Does the mulch need to be removed?
Usually not. The chip layer breaks down, holds moisture, and slows new growth. We can rake and pile it if you're prepping for a pad or driveway.